Sure Seal Quick Dry Grout & Tile Aerosol Sealer 300gm
It provides superior protection to the toughest porous surfaces such as sandstone, bluestone, travertine,
concrete, terracotta, slate, grout and other porous masonry surfaces.
Pick up & deliver to Sydney & Melbourne metro area only.
Warning: Last items in stock!
This is unique in the tiling industry and was specifically formulated to seal porous grout, tile and
stone surfaces. It is quick drying and easy to use.It seals and protects against water and oil based
staining, dries invisible and will not leave a film or discoloration on the surface.
Aerosol Directions For Application
Hold aerosol can approximately 15-20 cm away from desired surface, press spray button and apply product with a light even
coat over surface to be treated using a sweeping motion, overlapping sprayed areas for best coverage. Allow sealer to cure at
least 24 hours. Overspray might be slightly visible on dark coloured flooring material. If this occurs, apply thin coat of sealer
and buff with a clean cloth.
Application on Dry or Damp Grout
On dry grout, make sure grout is clean and apply an even coat of sealer. For damp grout, allow at least 20 minutes after
installation before applying sealer. Curing time of sealer will be the same as the manufacturer's stated time for the grout or
treated material. Spray, dab, brush, or roll product onto the grout. Completely seal the grout and let dry.
To clean treated areas, simply use water and mild detergent. Do not use harsh cleaning agents such as abrasive powders,
ammonia, acids or bleach or abrasive scrubbing pads.
Sure seal 300 gm Aerosol, seals approximately up to 500 linear metres depending on size of grout or up to 18 square metres of grout and tile, depending on the material to be sealed and how it's applied. One litre will cover approximately up to 40 m2 depending upon the material to be treated and method of application.