Sure Seal Quick Dry Grout, Tile  & Stone Sealer

This is unique in the tiling industry and was specifically formulated to seal porous grout, tile and

stone surfaces. It is quick drying and easy to use.It seals and protects against water and oil based

staining, dries invisible and will not leave a film or discoloration on the surface. 

Liquid Directions For Application

Apply Sure Seal Grout, Tile & Stone Sealer- Quick Drying with a paint brush, flat lambs-wool applicator, pump or airless

sprayer. Apply one coat with a smooth even strokes, lightly coating the surface being treated. At least one hour drying time is

recommended before using the treated area. Two coats are recommended. For optimum protection, allows to cure for 24

hours. If necessary, buff off any excess residue before the second coat is dry.

Application on Dry or Damp Grout

On dry grout, make sure grout is clean and apply an even coat of sealer. For damp grout, allow at least 20 minutes after

installation before applying sealer. Curing time of sealer will be the same as the manufacturer's stated time for the grout or

treated material. Spray, dab, brush, or roll product onto the grout. Completely seal the grout and let dry.

Maintenance

To clean treated areas, simply use water and mild detergent. Do not use harsh cleaning agents such as abrasive powders,

ammonia, acids or bleach or abrasive scrubbing pads.

Coverage

Sure seal 300 gm Aerosol, seals approximately up to 500 linear metres depending on size of grout or up to 18 square metres of grout and tile, depending on the material to be sealed and how it's applied. One litre will cover approximately up to 40 m2 depending upon the material to be treated and method of application.