Special patented nylon strap for use on calibrated floor and wall tiles 300mmx300mm or larger.
Box of 200 pcs
Box of 1000 pcs
Warning: Last items in stock!
Tuscan Leveling System Strap
Tuscan Leveling System Product Description:
The Tuscan Leveling System is an innovative product that will greatly assist most anyone in, the installation of stone and ceramic tiles. It is designed to create a virtual lippage free installation with stone and tiles. The system interlocks the tiles, virtually creating a single flat slab surface while the setting material is curing. The interlocking design of the system reduces and in most cases eliminates settling from shrinkage, as well as minimizing the possibility of warping. The system reduces the need to re-lift tiles to add more mud and/or the process of shimming tiles; thus greatly increasing the speed of installation, all the while creating that much desired lippage free mirror surface.
Tuscan Leveling System Installation Guidelines:
For best results, before using straps, the straps should be soaked overnight (one time), or for an hour prior to use in hot water. Soaking is one time only; regardless of how long the straps are on hand. This increases the straps elastic strength, giving them maximum tension needed for proper installation.
The Tuscan Leveling System straps will achieve a 1/32-grout joint, if you want a wider joint, you can use the Tuscan Leveling System with most common spacers. Simply insert corner or side spacers of the desired width, up to 3/8 inch.
Most installers find the Tuscan Leveling System works best when the Thinset or mortar is a little looser, not as stiff.
To facilitate a speedy instillation, pre-assemble the straps and caps you will need for the days work, leaving 1 and 1/2 to 2 inches between the bottom of the caps and the strap bottom plate.
Insert pre-assembled caps and straps under the tile edge, sliding the straps base plate under the tile being installed, at least 2 per tile side (more for larger tiles). The recommended spacing of each strap is 6-8 inches apart.
Important note: when inserting the caps and straps under the side of the tile, DO NOT place them at the tile corners. Inserting them on tile corners will prevent an accurate installation, and could crack or break the corners of the tiles when removed, also it will be very hard to keep the grout joint line straight.
Once the pre-assembled cap and strap is in place, using your fingers, slide the cap down on the strap making contact with the tile. After the insertion of the caps and straps on the side of the tiles, install the other tiles that fit against the first tiles. After that is done, tighten the straps and caps with the installation gun (manual or ergonomic), make sure you always back-butter each tile just before instillation.
Frequently asked questions
How do I profit by using the Tuscan Leveling System?
In most cases, installation time is 2 times faster, which puts money in your pocket when the job is bid on square metre
basis. Additionally, as the installer, you can usually pass on the cost of the Tuscan Leveling System on to your client as part
of the cost of the job.
Can the caps be reused?
Some installers report that they have reused the caps as many as 30 or more times (which greatly reduces the overall cost
Does the Tuscan Leveling System help eliminate lippage?
Yes, the unique patented system virtually eliminates lippage.
Does the Tuscan Leveling System eliminate grinding after installation?
Responses from actual installers indicate that in large open spaces the installation can be three times as fast.
In areas where there is significant cut up or fitting, to be done, they report it can be twice as fast.
Will the Tuscan Leveling System work with small tiles?
The Tuscan Leveling System is designed to work with tiles 300mm or larger.
Will the Tuscan Leveling System work with Ceramic Tiles?
The Tuscan Leveling System will work with ceramic, marble, onyx, granite and most composites.
When using the Tuscan Leveling System, can tiles be walked on while the adhesive is still wet?
Although we can’t officially recommend it, in most cases, yes.
Can the Tuscan Leveling System be used on walls?
Why do you recommend soaking the straps in hot water prior to use?
For best results, the straps should be soaked in hot water for at least 60 minutes prior to use. The proprietary composition
of the strap needs to absorb sufficient moisture so it will stretch properly during installation. As the mastic adhesive is dying,
it pulls moisture out of the strap so that the strap can snap off cleanly after drying is complete.
Will there be air pockets under tiles after using the Tuscan Leveling System?
No. We recommend that the installer “back-butter” the tiles as part of the installation.
What is the learning curve using the Tuscan Leveling System?
Usually only minutes, not hours, or days...
To break strap after mortar has set:
After setting material has properly cured, remove the straps and caps by snapping the strap off at its breaking point. Set the installation tool lever to HVY, then turn smaller fine adjust red knob to highest setting.
CAUTION: Breaking the strap: Some installers have reported that, after mortar
has set, they find it faster to just kick the caps in the direction of the grout joint
and they easily break away. However, in doing this, one must use caution to
avoid scratching the tile! With kicking or using a rubber mallet, you may cause
the metal tongue in the cap to loosen or come out, rendering the cap useless.
Under normal use, the caps can be reused dozens of times.